BuildPro

Alpha 28 Metrisch System

Ultrahochbelastbarer 5-seitiger Tisch mit Bohrungen von 28 mm Durchmesser

Alpha 16 Metrisch System

Hochbelastbarer 5-seitiger Tisch mit Bohrungen von 16 mm Durchmesser

Die härtesten, flachsten und am härtesten arbeitenden Schweißtische.

Die Alpha-Familie besteht aus unseren 5-seitigen Tischsystemen, kombiniert mit unseren patentierten, reversiblen und austauschbaren Ober- und Seitenplatten.

Alpha-Tische sind sowohl in metrischen als auch in zölligen Abständen und mit Bohrungen von 28 mm bzw. 16 mm Durchmesser erhältlich. Alle Deckplatten sind aus wärmebehandeltem Stahl gefertigt, auf 550 Vickers gehärtet und mit einer Nitritbeschichtung mit einer Einsatztiefe von 0.01 bis 0.02 mm versehen.

Alpha 28 vs. Alpha 16

Durchmesser der Tischlöcher

28 mm

16 mm

Lochabstand

100 mm

50 mm

Ebenheit des Tisches

±0,125 mm pro 600 x 600 mm

±0,125 mm pro 600 x 600 mm

Plattendicke

25 ±0,06 mm

12 ±0,12 mm

Höhe der Arbeitsplattenseite

200 mm

150 mm

Alpha 28 Metrisch System

The only modular ultra heavy duty welding table with positionable, self-locating, reversible Table Plates for unlimited possibilities in heavy duty fixturing for welding and fabrication. Accurately locate, position and clamp stock for higher quality welding.

BuildPro Engineers developed the Alpha 28 line by customer demand for an affordable, heavy duty, metric Welding Table. The five-face Alpha 28 Table is the optimal solution for precision vertical and horizontal fixturing to expand your capabilities in welding and fabrication.

Table Accuracy

Hole Diameter:

28 + 0.20 /-0 mm

Hole Spacing:

100 ±0.05 mm

Table Flatness:

±0.125 mm per 600 x 600 mm

Plate Thickness:

25 ±0.06 mm

Tabletop Finish: 

Nitrided (Heat-Treated)

Surface Hardness:

HV 750

Coefficient of Friction:

0.37

Top Plate

Material:

P20

Hardness:

HV750

Side Plate

Material:

Q345B

Hardness:

HV550

Table Plates are made from tough P20 low alloy tool steel for a HV750 hardness, then CNC machined for flatness.

QPQ Nitriding Treatment provides corrosion and weld spatter resistance for superior performance and wear.

Patented, self-locating Table Plates can be repositioned, then easily realigned to the original position. Reposition the table plates as needed to increase the width of the table for oversized or complex fixtures.

2X Life! After showing signs of wear, Alpha 28 Table Plates can be reversed to provide a new work surface.​

Each Heavy Duty Table leg supports 2,000 kg.

Alpha 28 tables feature 6 legs compared to competitors’ 4 legs on 2.4 x 1.2 and 2.1 x 1.0 table sizes for greater rigidity and flatness​

System Borehole​

System Borehole

Hole Diameter: 28 +0.20/-0 mm
Hole Spacing: 100 ±0.050 mm

Large chamfer on top for easy insertion.
Chamfer on underside as well to maximize bolt clamping force.

Material Thickness

Plate Thickness: 25 ±0.06 mm
Tabletop Finish: Nitrided (Heat-Treated)
Coefficient of Friction: 0.37

Material Thickness​

Table surface​​

Table Flatness: ±0.125 mm per 600 x 600 mm
Material: P20
Hardness: HV750
Surface Hardness: HV750
Base Material Hardness: HV 260-290

Borehole spacing 100 mm with additional 100 mm grid offset by 50 mm in the x and y axis, aka diagonal grid.

Self-locating Plate System for Top and Side Plates

Locating features in the table frame and plate combine with our locator bushings for self alignment.

Alpha 28 Self-locating Plate System for Top and Side Plates

Table Side Panel​

Material: Q345B
Hardness: HV550
Tabletop: 200 mm high

Plate Mounting Detail for Side Plates​

Side Plates also use self locating bushing system.

Table Side Panel​

Material: Q345B

Hardness: HV550

Tabletop: 200 mm high

Alpha 28 Self-locating Plate System for Top and Side Plates

Patented Self-locating Plate System for Top and Side Plates

Locating features in the table frame and plate combine with our locator bushings for self alignment.

Material Thickness​

Material Thickness​

Side Plates also use self locating bushing system.
System Borehole​

System Borehole

Hole Diameter: 28 +0.20/-0 mm
Hole Spacing: 100 ±0.050 mm

Large chamfer on top for easy insertion.
Chamfer on underside as well to maximize bolt clamping force.

Table surface​

Table Flatness: ±0.125 mm per 600 x 600 mm (±0.005 per 24″ x 24″)

Material: P20

Hardness: HV750

Surface Hardness: HV750

Base Material Hardness: HV 260-290

Borehole spacing 100 mm with additional 100 mm grid offset by 50 mm in the x and y axis, aka diagonal grid.

Material Thickness​

Plate Thickness: 25 ±0.06 mm

Tabletop Finish: Nitrided (Heat-Treated)

Coefficient of Friction: 0.37

Kevin T
Kevin T
Morro Bay, CA
Weiterlesen
I am still waiting on the fixture kit but so far am very impressed with the craftsmanship put into this table. Im is super heavy but easy to assemble with the help of a forklift.
Rchard S
Rchard S
West Valley, UT
Weiterlesen
Tables are very versatile, well built, and easy to configure.

Stärkerer, steiferer Rahmen

Die maschinell bearbeitete Rohrrahmenkonstruktion des Alpha 28-Tisches bietet im Vergleich zu reinen Plattenrahmen eine verbesserte Ebenheit und Verwindungssteifigkeit. Der starre Rahmen mit modularen Platten an der Alpha 28 bedeutet im Vergleich zu geschweißten Plattenkonstruktionen weniger Hochpunkte und weniger Verwindung. Die geschweißte Konstruktion einer reinen Plattenkonstruktion führt häufig zu Verformungen und hohen Punkten in den Ecken und in der Mitte.

PRO28 Tubular Frame Design
Alpha 28 Tubular Frame Design
Welded Plate Design
Welded Plate Design

Jede Platte ist aus einem niedrig legierten Werkzeugstahl gefertigt, der für den Einsatz im Formenbau robust genug ist. Nach dem Schleifen und der Oberflächenbearbeitung wird jede Platte mit einem QPQ-Nitrierverfahren weiterbehandelt, das die Härte, die Korrosionsbeständigkeit und die Beständigkeit gegen Schweißspritzer verbessert.

Die Platten auf dem Tisch können je nach Bedarf bewegt oder entfernt werden; das patentierte Plattenpositionierungssystem bedeutet, dass die Lochabstände immer innerhalb der Toleranz liegen, ohne dass eine spezielle Nachkalibrierung erforderlich ist.

Die einzigartigen und vielseitigen Alpha 28-Tische werden durch ein komplettes Sortiment an modularen Spannbauteile und Spannwerkzeugsätze.

tabletop closeup
The system of Ø28 mm CNC machined table holes in a 100 mm grid pattern is the ideal platform for rapid, precise, and accurate fixturing.
Offset Tableplates
The patented Locating Bushing design allows you to easily remove, re-position, re-align, and reverse the table plates. Table Plates can be positioned to create the custom work surface configuration required for each unique fixturing application.
Frame Ribbing
Alpha 28 tables combine the rigidity and accuracy of a welded and machined frame with the flatness of precision ground, CNC machined plates.

Alpha 16 Metrisch System

The new heavy-duty table line from BuildPro; it features 5 sides fitted with 16 mm diameter boreholes for more versatility and expandability than before. Maintaining industry-leading requirements for flatness, squareness, and dimensional accuracy.

Table Accuracy

Hole Diameter:

16 + 0.05 / -0 mm

Hole Spacing:

50 ±0.025 mm

Table Flatness:

±0.125 mm per 600 x 600 mm

Plate Thickness:

12 ±0.12 mm

Tabletop Finish: 

Nitrided (Heat-Treated)

Surface Hardness:

HV 750

Coefficient of Friction:

0.37

Top Plate

Material:

P20

Hardness:

HV750

Side Plate

Material:

Q345B

Hardness:

HV550

Precision ground steel plates, with CNC machined Ø16 mm holes in a 50 mm grid pattern for locating, positioning and mounting BuildPro clamps and accessories.

Plates can be reconfigured to expand the width of the table for larger projects.

Heavy Duty Leveling Feet ensure proper leveling of the table on uneven surfaces.

REVERSIBLE Self-Locating Top & Side Plates

All BuildPro welding tables feature precision machined self-locating steel plates and reversible top plates; this enables each table plate to be removed and flipped 180 degrees to expose a new working surface if the top side has been damaged or worn down.

Table Accuracy

Table flatness: ±0.125 mm per 600 x 600 mm
Hole spacing: 50 ±0.025 mm
Hole diameter: 16 + 0.05 / -0 mm
Plate thickness: 12 ±0.12 mm

Tabletop Side Height

The new five-sided tables feature a 138 mm side plate combined with the top plate to create a 150 mm height.

Alpha table side plates feature an extended 5 borehole pattern for added precision and adjust-ability.

Plate Mounting Detail for Side Plates

Side Plates also use self locating bushing system.

Nitrided (Heat-Treated) Tabletop

All top and side plates of alpha table are constructed from heat-treated steel, hardened to 58-62 HRC(top) / 50-55 HRC(side), and finished with a nitrite coating with a case depth of 0.01 – 0.02 mm.

Table Accuracy

Table flatness: ±0.005 per 24″ x 24″

Hole spacing: 2.000″ ±0.001

Hole diameter: 0.625″ +.002/-.000

Plate thickness: 0.47″ ±0.004

Tabletop Side Height

The new five-sided tables feature a 5-1/2″ side plate combined with the top plate to create a 6″ height.

Alpha table side plates feature an extended 5 borehole pattern for added precision and adjust-ability.

Plate Mounting Detail for Side Plates

Side Plates also use self locating bushing system.

Nitrided (Heat-Treated) Tabletop

All top and side plates of alpha table are constructed from heat-treated steel, hardened to 550 Vickers, and finished with a nitrite coating with a case depth of .0004-.0008″.

Beispiele für Befestigungen

Alle Alpha-Tische und Spannelemente

The current query has no posts. Please make sure you have published items matching your query.